Holes Adapter
Holes Adapter
 |
 SMA female to N female 4 holes flange Coax Adapter  US $2.74
|
 10 Pcs SMA Female Jack 4 holes flange to SMA Female Jack Adapter New US $14.99
|
 SMA female to N female RF adapter with 4 hole panel US $9.00
|
 New SMA Female Jack 4 holes flange to SMA Female Jack Adapter US $1.89
|
 UHF female to female with flange 4 holes adapter US $3.90
|
 BNC Female to female flange 4 holes Adapter connector US $2.50
|
 SMA female with 4 holes flange solder connector adapter US $1.99
|
 N jack to N jack adapter connector 4 hole panel mount US $3.90
|
 L29 7 16 female 4 hole flange solder connector Adapter US $4.99
|
 L29 7 16 Din male hole flange solder connector adapter US $4.99
|
 UHF adapter UHF Jack to UHF Jack 4 Hole Panel Mount US $3.90
|
 SMA Faceplate Female Connectors Adapter 4 Hole US $2.89
|
 Angle adapters snap hole Stainless steel lot of 4 US $35.00
|
| The Ham Radio Blog |
Problem on Gateway pa165002 laptop ac power adapter jack
Using a pocket knife remove plastic supports from the internal side of the base assembly, so the side where the new jack will be mounted is flat. Again, using the pocket knife remove the plastic wall surrounding the mounting hole. Make the hole larger, so then new jack fits in.
The new Gateway pa165002 ac adapter jack is too long and if you install it as is the laptop cover will not sit properly on the base. It happens because one of the speakers (in Satellite L305D) is located very close to the power jack. It will work if you make the jack shorter. You can cut off part of the long lead or simply bent it as I did. After it's done coat both leads with generous amount of solder.
Now remove the damaged Toshiba PA3283U-1ACA AC Adapter power jack from the laptop and cut off wires somewhere close to the jack base. Remove isolation, twist wires and coat them with solder. The red "+" wire will connect to the lead in the center of the new jack. The black "-" wire will connect to the lead on the side - the one you made shorter. In some laptops Toshiba uses green wires instead or red wires. They also should be soldered to the "+" lead in the center of your new jack.
Check the polarity before you apply power to the laptop. Now mount the new power jack on the base. Solder wires to the new jack. Again, the red wire is soldered to the lead in the center and the black on to the lead on the side. The new (modified) power harness has been installed into the laptop base. Now you can tighten the nut on the Gateway pa165002 laptop ac power adapter jack and secure it on the base. Remove plastic reinforcement walls so they do not touch the Toshiba ac adapter power jack when the cover is installed. If you leave these walls, there will be a gap between the cover and base.
By the way, if your laptop is still under warranty, Toshiba might fix this problem at no charge. Call them first or take the laptop to the authorized repair center. If this modification works for you, please mention the laptop model in the comments. You are welcome to post any suggestions and improvements.
Gateway pa-1650-02 laptop ac power adapter Description:
Input: AC100-240V (worldwide use)
Output: DC15V 5A
Power: 75W
Outlet: 2-prong
Connecter size: Internal Diameter: 3.0mm
External Diameter: 6.3mm
Item Includes: AC Adapter and Power Cord
Performance: Short Circuit Protection and Overload Protection
Condition: new
100%OEM compatible, guaranteed to meet or exceed OEM specifications!
Product Warranty of Gateway pa165002 laptop ac power adapter
12 months warranty
For return of non-defective product within the first 10 days from date of purchase, full refund.
Within the whole product warranty days, unartificial defective product returns are accepted for replacement, and we will afford all shipping fee.
Find more brand laptop ac adapter at hootoo.com
About the Author
Neo Max is a leading cell phone tricks tech blog author.
Will a 5-1/4" speaker fit into a 6x8" speaker hole without the need for an adapter?
I found a pair of $30 5-1/4" Sony speakers for my car from WalMart. Crutchfield says 5-1/4" speakers will fit but they also send an adapter when you purchase speakers from them. Would they fit the screw holes without the adapter? I don't care how it looks since it will be covered by a door panel.
not 100% sure, but if it did you would get 1 or 2 screws in it MAX.
You'd be happier with some 6x8s or 6.5s,
I know for a fact 6.5s go in 6x8/5x7 holes
5.25s sound like crap.
Go to another walmart and you can find other brands for ~30 bucks.
